CART
Helmets will not protect you from injury in every type of accident. Even when wearing a helmet, low-speed accidents can still result in serious head injury or death.
Helmets will provide partial or full protection. Studies have shown that you are better off wearing a helmet than not wearing one. Helmets may not protect against injuries to the spine or neck.
WARNING:
– No helmet can protect the wearer against all impacts.
– We recommend that you choose a helmet with the highest coverage.
– Wearing the helmet correctly will help increase the helmet’s protection and reduce the injuries you may encounter.
– Ensure the helmet fits your head circumference and is always fastened when in use.
– Any helmet that has undergone an impact must be replaced, even if no external damage is visible.
– Do not modify the original structure of the helmet or use a damaged helmet.
– For hygiene and safety, the helmet liner needs to be cleaned regularly. Replace the liner every 6 months to 1 year of use, or sooner if signs of damage appear.
Helmets are designed to reduce injury to the head area. To perform their function, helmets must fit properly, be worn correctly, and be securely fastened.
1
Carefully read the instructions for use and warning information before using the helmet when participating in traffic.
2
The stickers inside the helmet will contain various instructions and warnings. Please read the information carefully before use.
3
Do not reuse a helmet that has undergone an impact because it may reduce the helmet's protective capability. In this case, the helmet should be inspected and replaced.
Our helmets come in various styles and sizes designed to fit most people. However, choose helmets that fit you snugly without being too loose or too tight.
WARNING:
To achieve maximum protective effect, ensure your helmet is worn correctly. If your helmet does not fit properly, exchange it for a different size at our retail dealers. All usage and adjustment instructions must be performed while the helmet is in the correct position. Otherwise, the helmet will not fit properly, which may cause the helmet to shift out of position or fall off in the event of an accident.
Position the helmet horizontally on your head, about two finger-widths above your eyebrows. Ensure the straps are evenly taut, not twisted, and fit snugly.
Fasten the buckle securely, ensuring the strap rests against your throat and fits snugly around both ears. Do not use a damaged buckle.
Adjust the size adjustment dial clockwise to tighten the helmet to your head circumference and counterclockwise to loosen it.
Note: For helmets with visors, open the visor before putting on the helmet and performing the above steps.
WANRING:
To utilize the helmet’s full functionality, you need to wear it correctly and position the buckle under your chin, with the strap resting against your throat. The strap should fit comfortably around both ears.
Adjust the strap’s tension for a snug yet comfortable fit by pulling the strap end through the buckle to tighten or loosen as needed. Always wear the helmet with the chin strap securely fastened, pulled tight, and pressed against your throat.
The helmet is equipped with a fit adjustment system to help stabilize the helmet in the correct position while you ride.
Khi được điều chỉnh đúng cách, mũ bảo hiểm sẽ bao quanh đầu bạn và ôm chặt đầu bạn với áp lực chắc chắn nhưng thoải mái.
When properly adjusted, the helmet will surround your head and fit snugly with firm but comfortable pressure.
After securely fastening the buckle, proceed with the following checks to ensure your helmet is worn correctly:
– Grip the helmet firmly with both hands and rotate the helmet from side to side. If the helmet moves easily, check and tighten the rear adjustment dial. Simultaneously adjust the helmet straps.
– Move the helmet forward and backward to determine if it fits properly. If the helmet movement obstructs your vision, readjust the helmet straps and the rear adjustment dial.
WARNING:
For maximum protection, this helmet must be worn correctly, fit properly, and be securely fastened according to the instructions.
The helmet must always be fastened when riding to ensure it does not fall off or fly off while riding or in a collision.
Check the fit and adjust regularly each time you use it.
Use only water, mild soap, and a soft cloth to clean the helmet’s shell, visor, and liner. Helmets can be damaged by exposure to highly corrosive substances or certain solvents.
1
High temperatures (above 1100F, 430 C) can melt the helmet shell. Do not store the helmet near heat sources. Do not use if the helmet shell has melted or deformed.
2
The protective capability of the helmet will gradually decrease over time, depending on various factors such as: Improper storage, proximity to heat sources, hazardous chemicals,...
3
The lifespan of a helmet may be less than 2-3 years due to exposure to sunlight or improper storage. It is recommended to replace the helmet after 2-3 years.
– Warranty period: 1 year.
– The following information applies only to helmets purchased within Vietnam.
– If within 1 year, the buyer discovers a product defect determined by the manufacturer during normal use and maintenance, we will choose appropriate warranty options: Repair or replacement.
– In the event of a warranty claim, the buyer must contact the retail store where the product was purchased or our hotline. Additionally, provide necessary information about the reason for the defect and proof of purchase date. This includes returning the product to the manufacturer for inspection, warranty, and repair.
WARNING:
We reserve the right to refuse warranty for products determined to be due to intentional physical impact, abuse, improper repair, modification, or use contrary to the manufacturer’s intended purpose.
For any inquiries, please contact us via the contact page to resolve issues regarding warranty, repair, usage instructions, and purchases.
